Raw drivers
Home audio
HI-FI electronics
Fiber glass resin
Subwoofer
Aluminium speaker
Karaoke speaker
Pro audio/Public address
Components
Home > Midrange woofer

KSW2-6115 Midrange

Time：2009-07-15  Source：admin  Author：
We adopt the low distortion symmetrical structure magnetic system, special voice coil for woofer and 35mm diameter high intension aluminum alloy frame and 4 layers dual circle wire. The body is used mixed paper fibre and diffused the net spots on the surface equably in order to reduce the distortion produced when the body surface doing division. Because it’s a woofer unit, we design the size of the dirt-cap the same as the body and mix the other organic fibre in order to filtrate some midrange and then increase the low frequency. We use well-controlled Conex-Y brace to prevent the scattered condition appearing in the low frequency while it works under big power.

Style: 6.5" woofer
Frequency range: 35Hz-1.5KHz
DCR: 5 Ohm
Sensitivity(1W/1M): 86dB
Fo: 34Hz
Power handling: 60W/100(Max)
Diaphragm material: Paper
Voice coil dimension: Φ35.5mm
Magnet size: 100 x 60 x 20 ( OD x ID x H)mm
Magnet material :Y-30
Qms.: 2.875
Qes.: 0.413
Qts.: 0.361
Next ： KSW2-5271 Midrange
Back： KSW2-5029E Midrange